Scudo Sports

Fixie üzerine ...

Fixie bisiklet benim de hoşuma gidiyor(hiç kullanmamış olsamda) lakin freni vitesi olmamasına çelik kadro olmasına rağmen bu kadar pahalı olmasını anlayamıyorum. Sevilmemesinin sebeplerinden biride bu olabilir.
 
Scudo
Bir sabah fixieni al gel de okuluma giderken bana takıl anlarsın fixie neden herkes tarafından sevilmiyor. Haftada 2 kere okula bisikletle gidiyorum. Okulum Maltepe Üniversitesi, Başıbüyük tepesinin zirvesinde yer alıyor, 5 km full tırmanış yaparak okuluma gidiyorum. Yer yer en küçük viteste tek haneli hızlarda tırmanıyorum.
 
Çocukluğumda uzun yıllar pinokyo ve daha sonra da dönem dönem single kullanmış olsam da fixed deneyimim hiç olmadı. Vitesle pek aram yok ama rampa inişleri sıkıntı olurdu sanırım.
Fixed elbette güzeldir, seveni çoktur, fixed kullanan başka bike kullanmaz, sbaşkasını sevemez belki ama bana yine de single daha çekici geliyor.
 
@Anonim sevilmemesi için bir neden daha galiba değil mi hocam:D , fixie sürecek kişinin beyin mekanizması zehir gibi olmalı , beyin merkezindeki hesap ayarlarında hata olmamalı , anladığım kadarıyla, sadece kas yetmez bu işte.
Bence normal bisiklet kullanırken beyin daha çok çalışıyor, fixiede ise kafaya takacak pek bir şey yok güzelliği burada🙂.
Şaka bir yana Fixiede pedal çarpacaksa yapacak fazla bir şey yok zaten engellemek için sanırım. Büyük ihtimal ne oluyor demeden bisikletle sarmaş dolaş yuvarlanıyor olursunuz. Ya da pedal çarpmasın diye yatmadan dik dönerseniz... Şöyle bir gittiğim patikalardaki virajları düşündümde, yok yok dağ bisikletini fixie kullanmak bana göre değil, ben de sevmedim böyle fixieyi😅
 
Arka aktarıcının zarif ve çok iyi tasarlanmış bir mekanik sistem olduğunu düşünüyorum. Yokuş seviyorum. Vitesli bisikletler ile fixie arasında ön aktarıcının kaba ve hantal bir yapısı olması dışında pek de karmaşıklık farkı yok.

- Fixie gösterişli değil, hava atmak zor. Vitessiz deyince zaten direk fakir damgası yiyorsunuz.

1583689402089.png

1583689432558.png
Yol bisikletleri daha gösterişsiz doğrusu. Hava atmak isterseniz herhangi bir bisiklet türünün havalısını bulabilirsiniz.

- Fixie pahalı değil. Çok az parça var. Reklam yapmaya değmez. Çoğu firma kataloga koymuyor bile.

Bisiklet firmaları parça satışından mı para kazanıyor? Bisikletlerimi aldığım firmalardan şu ana kadar hiç bir parça almadım. Kadro kulağı ve aero modellerdeki sele borusu gibi parçalar dışında hiç bir parça için bisikleti aldığınız firmaya muhtaç değilsiniz. Ayrıca fixie bisikletlerin fiyatları pek de az değil.

- Fixie minimalist, sade. Aksesuar parça satmak zor fixie kullanan adama.

Fixie kullananlar susamıyor (suluk aksesuarı yok); yağmurda ıslanmıyor (çamurluk gibi aksesuarlar yok); güneş battığı anda sürmeyi bırakıyor (lamba aksesuarı yok); yayaların olduğu yerlerde bağırıyor ya da tehlikeli bir şekilde sürüyor (zil aksesuarı yok); fixie lastiği patlamaz, o yüzden yanında yedek malzeme taşımıyor (sele altı çantası yok, pompa yok, yedek iç lastik yok)... Buna benzer örnekler verebilir miyiz? Pek de doğru bir cümle değil sanki sizinki.

- Fixie kullanan birine başka bisiklet satmak zor. Başka bisiklet kullanırken artık zevk alamıyorum.

Doğrusu fixie ile vitesli bisiklet arasında parça sayısı ve karmaşıklığı, arıza oranı, kullanım süresi olarak pek de fark yok gibi. Parçaların listesi üzerinden gidersek ortaya çıkar bence. (ISO 8090'dan alıntı olduğun belirtiliyor). Birisi üşenmeyip karşılaştırırsa olabilir tabi :D

  • (link): as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates. Also sometimes used to describe suspension components, for example a swing arm pivot axle
  • (link): extensions at the end of straight handlebars to allow for multiple hand positions
  • (link) or end caps: plugs for the ends of handlebars
  • (link): cargo carrier
  • (link): a device that facilitates rotation by reducing friction
  • (link): an audible device for warning pedestrians and other cyclists
  • (link): alternative to chain-drive
  • Bicycle brake cable: see Cable
  • (link): a holder for a water bottle
  • (link): The bearing system that the pedals (and cranks) rotate around. Contains a spindle to which the crankset is attached and the bearings themselves. There is a bearing surface on the spindle, and on each of the cups that thread into the frame. The bottom bracket may be overhaulable (an adjustable bottom bracket) or not overhaulable (a cartridge bottom bracket). The bottom bracket fits inside the bottom bracket shell, which is part of the bicycle frame
  • (link): devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward
  • (link): a lever for actuating a bicycle brake
  • (link) or colloquially, brifter (see also (link), (link) and (link)): combined shifter and brake lever control
  • (link): a fitting protruding from a frame to provide attachment, typically for cable housings or tire pumps and similar accessories
  • (link): a fitting below the bottom bracket which guides a piece of bare inner (link) around a corner
  • (link): a metal cable enclosed in part by a metal and plastic housing that is used to connect a control, such as a brake or shifting lever, to the device it activates
  • (link): a type of bearing that is not user-serviceable, but must be replaced as a unit
  • (link): a group of stacked sprockets on the rear wheel of a bicycle with a rear derailleur
  • (link) or backpedal brake
  • (link): a system of interlinking pins, plates and rollers that transmits power from the front sprocket(s) to the rear sprocket(s)
  • (link): (link) cover for the entire chain either totally encasing (sometimes containing (link)) or 'incomplete'. Either way, designed to keep clothing from fouling the chain. See also Skirtguard, (link).
  • (link): (one of the) front gear(s), attached to a crank
  • (link): see Crankset
  • (link): a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends
  • (link): a device to maintain proper chain tension
  • (link): a device to aid in setting the proper chain tension
  • Cluster: a bicycle (link), either a freewheel, or cassette
  • (link): the set of rear sprockets that attaches to the hub on the rear wheel
  • (link): holds bearings in place, pressed against the cup
  • (link): pin for attaching cottered (link)
  • (link): to connect tubing together
  • (link) or chainset: composed of cranks and at least one chainring
  • (link): receives ball bearings which roll along its inner surface; integrated on most conventional hubs or can be pressed into older bottom bracket shells. See also Cone
  • (link): an electronic accessory that measures and displays instantaneous and cumulative speed and distance. Often provides other measurements such as heart rate
  • (link): a piece on the rear (link) that the derailleur attaches to.
  • (link): an assembly of levers, usually cable actuated, that moves the chain between sprockets on a cassette or chainring assembly
  • (link): tube on the bicycle frame that runs from the head tube to the bottom bracket
  • (link): a bicycle rear fork end that allows the rear wheel to be removed without first derailing the chain. The term dropout is often incorrectly used to refer to any fork end, but not all fork ends are dropouts
  • (link): any cap serving to keep dirt and contamination out of an assembly. Common over crank bolts, often plastic
  • (link): bicycle lighting component, also known as generator
  • (link):
1) attachment point on frame, fork, or dropout for fenders, racks, etc.2) a hole through which a (link) passes through the rim so it may attach to a spoke
  • (link): not simply a type of shifter or a type of derailleur, a complete system with switches instead of levers, wires instead of Bowden cables, and motor-driven derailleurs that must all work together
  • (link): a full or partial covering for a bicycle to reduce aerodynamic drag or to protect the rider from the elements
  • (link) or mudguard: curved pieces of metal or plastic above the tires which catch and redirect road spray thrown up by the tires, allowing the rider to remain relatively clean. May come in pairs
  • (link): a metal or plastic sleeve used to terminate the end of a cable housing
  • (link): a mechanical assembly that integrates a bicycle's frame to its front wheel and handlebars, allowing steering by virtue of its steerer tube
  • (link): paired slots on a fork or frame at which the axle of the wheel is attached. See also Dropout
  • (link): the mechanical core of a bicycle, the frame provides points of attachment for the various components that make up the machine. The term is variously construed, and can refer to the base section, always including the bottom bracket, or to base frame, fork, and suspension components such as a shock absorber
  • (link): a ratcheting assembly onto which a cog or cassette is mounted that allows the bicycle to coast without the pedals turning
  • (link): a ratcheting assembly that incorporates one or more cogs and allows the bicycle to coast without the pedals turning
  • (link): plates added to the outsides of (link) tubes to strengthen joints. These are more commonly seen on (link) and (link) bikes
  • (link): part of frame or an attachment to the frame to which the derailleur is attached (see Derailleur hanger)
  • (link): a lever attached, usually using an intermediary stem, to the steerer tube of the fork. Allows steering and provides a point of attachment for controls and accessories
  • Handlebar plug: see Bar plugs
  • (link): a tape wound around dropped handlebars so as to provide padding and grip, usually cork or cloth, sometimes foam rubber
  • (link): manufacturer's or brand logo affixed to the (link)
  • (link): the tube of a bicycle frame that contains the headset
  • (link): the bearings that form the interface between the frame and fork steerer tube
  • Hood: the rubber brake lever covering on bikes with drop style handle bars
  • (link): the core of a wheel; contains bearings and, in a traditional wheel, has drilled flanges for attachment of spokes
  • (link): a generator inside one of the hubs for powering lights or other accessories
  • (link): a gearbox mounted inside the hub, 3-speed is common, 5, 7 are available ("Sturmey-Archer") and Rohloff make a 14-speed hub. Cable operated by one or two cables
  • (link): a turn signal
  • (link): a bladder that contains air to inflate a tire. Has a Schrader, "Woods"/"Dunlop" or Presta valve for inflation and deflation
  • (link): one of two small sprockets of the rear derailleur that guides the chain
  • (link): a folding attachment used for assisting a bicycle to stand up on its own. Usually mounts to frame near bottom bracket, sometimes near rear dropouts
  • (link): also called a "lawyer tab", a retention device on the dropouts of the front fork to prevent inadvertent loss of the front wheel in the case it is not properly secured
  • (link): a nut designed not to loosen due to vibration
  • (link): a ring, usually metal, of varying design, that serves to retain a component in place
  • (link): a metal connector used to align frame components where they join each other
  • (link): any accessory equipment designed to carry tools, gear or cargo
  • (link): a bicycle chain accessory that allows convenient removal and reconnection of an installed bicycle chain without the need for a chain tool
  • (link): a specialized nut that most commonly attaches a spoke to a wheel rim. In some systems, it provides attachment to the hub
  • (link): cloth zippered storage bags that mount to sides of luggage racks. Pronounced pan-ear, or pan-yer (an old English word, which is derived from an old French word)
  • (link): mechanical interface between foot and crank arm. There are two general types; one secures the foot with a mechanical clamp or cage and the other has no connection to lock the foot to the pedal.
  • Peg: short metal tube, about 6 inches (15 cm) long and 2 inches (5.1 cm) fastened to one or both ends of the wheel axles to either enable the rider perform certain (link) or provide a place for extra riders to stand or rest
  • Portage strap: a strap (usually made of leather) attached to the inside of the bike frame, designed to make carrying the bike over one's shoulder easier
  • (link): a skewer with a lever on one end that loosens when the lever is flipped. Used for releasing wheels and seat posts
  • (link): a rack that attaches behind the seat, usually with stays to the rear dropouts, that serves as a general carrier
  • (link): reflects light to make bicycle evident when the illuminated by headlights of other vehicles. Usually required by law but held in disdain by many cyclists
  • Removable training wheels: used for assisting balance. Comes in pair. Useful for first time bicyclists
  • (link): that part of a wheel to which the tire is attached and often forms part of the braking mechanism
  • Rotor:
1) the disc component of a disc (link).2) another name for a (link) - a device that allows the handlebars and fork to revolve indefinitely without tangling the rear brake cable.
  • (link): extension levers, and interrupt brake levers. Used to apply brakes in order for the bicycle to slow down or suddenly stop
  • (link) or (link): what a bicyclist sits on
  • (link): a metal framework over which saddle covering is stretched. The seat post attaches to the seat rails by means of a clamp
  • (link): a frame lug on the top of the seat tube serving as a point of attachment for a clamp to secure the seat post
  • (link): the roughly vertical tube in a bicycle frame running from the seat to the bottom bracket
  • (link): a small storage accessory hung from the back of a seat
  • (link): a post that the seat is mounted to. It slides into the frame's seat tube and is used to adjust ride height depending how far into the seat tube it is inserted
  • (link): frame components, small diameter tubes running from top of seat tube to rear dropouts
  • (link): alternate to chain-drive
  • (link): gear shifting control
  • (link): for bicycles with suspensions, a device that limits the rate at which suspension rebounds after absorbing an impact
  • Side view mirror: aids in looking at the sides prior to moving slowly or turning to the left or to the right
  • (link) or coatguard: a device fitted over the rear wheel of a bicycle to prevent a long skirt, coat or other trailing clothes or luggage from catching in the wheel, or in the gap between the rim and the brakes
  • (link): an axle around which a pedal rotates; threaded at one end to screw into crank arms
  • (link): connects wheel rim to hub. Usually wire with one end swaged to form a head and one threaded end. A typical wheel has 36 spokes
  • (link): loudspeakers specifically made for bicycles and/or (link) for cyclists and pedestrians with children to listen music or answer phone calls on their (link) when bicycling or transporting children. Both (link) and (link) speakers are available to mount on their handlebars or frames. Even though speakers specifically made for bicycles are available to purchase, but depending on the sizes and shapes and the cyclists' ingenuities, any speakers can be strapped on to them typically by using silicone strappings. These speakers meant to eliminate the risks of using (link) such as obliviousness of incoming cars and other warnings, and continuous playing of music from them would also alert other cyclists and pedestrians nearby
  • (link) or cog: wheel with teeth that meshes with the chain; one of the wheels in the (link) or (link)
  • (link): a tube on top of a fork that is inserted through frame and serves as an axle by means of which bicycle can be steered
  • (link): a bracket used to attach handlebars to steerer tube of fork. Usually secured by pinch bolts
  • (link): as in common usage. Usually pneumatic. A (link) is glued to the wheel rim; most tires use tubes, but tubeless tires and rims are increasingly common
  • (link): a metal or plastic cage attached to a pedal. Usually has an adjustment strap. Secures foot to pedal for increased control and more effective transfer of power from foot to drive chain
  • (link): frame member leading from head tube to seat tube
  • (link) or simply valve: port for adding or releasing air from the inner tube. Two types are commonly used: (link) and (link). A third type, the (link), can still be found in Europe and Asia.
  • (link): as in common usage. Traditionally and most commonly spoked
  • (link): for attaching wheels before the development of the quick release skewer
 
Bisiklet firmaları parça satışından mı para kazanıyor?

Bisiklet firmaları ürününün yani bisikletin üzerine parça ekledikçe ''katma değer kazandırmış'' oluyor.Örneğin satıcının bisikletin üzerine eklediği aktarıcı x lira maliyetli ise bunu bisiklete eklediklerinde x+y liraya müşteriye satıyorlar ve ekstra y lira para kazanıyorlar.Bisiklet komplike olmaya başladıkça,üzerindeki ürün arttıkça ekstra ''y'' ler birikiyor birikiyor ve katma değer miktarı daha da artmış oluyor.
 
  • Beğen
Tepkiler: Cemal Ç. ve ag249
Bu konuya direkt etki eden konuların başında belki de bisikleti kullandığınız rotadaki eğimler geliyor. Benim rotam genelde aynı ve yokuş neredeyse yok, sürekli olarak sahili takip ediyorum. Performans ya da farklı rota denemesi yapmayacaksam her zaman ilk seçimim fixie oluyor. Bisikleti vücudumla tek parça hissediyorum, sürmesi inanılmaz keyif veriyor. Havanın rüzgarsız olduğu durumda hep fixieyi seçiyorum, bazen yol bisikletimi unutturuyor. İyi ki almışım.
Kendisi de şöyle bir şey;

20200308_213527.jpg
 
Neden sevilsin. Düzdede %10 eğimdede aynı vitesse yada inerken. Kendinle mücadeleyi çok seviyorsa alırsın 53-39 11 28 ruble bam bam gidersin. 1 ay takıl neden sevilmediğini anlarsın. 22 tane oran varken nede 1 tane ile kasayım
 
Arka aktarıcının zarif ve çok iyi tasarlanmış bir mekanik sistem olduğunu düşünüyorum. Yokuş seviyorum. Vitesli bisikletler ile fixie arasında ön aktarıcının kaba ve hantal bir yapısı olması dışında pek de karmaşıklık farkı yok.

Yol bisikletleri daha gösterişsiz doğrusu. Hava atmak isterseniz herhangi bir bisiklet türünün havalısını bulabilirsiniz.

Bisiklet firmaları parça satışından mı para kazanıyor? Bisikletlerimi aldığım firmalardan şu ana kadar hiç bir parça almadım. Kadro kulağı ve aero modellerdeki sele borusu gibi parçalar dışında hiç bir parça için bisikleti aldığınız firmaya muhtaç değilsiniz. Ayrıca fixie bisikletlerin fiyatları pek de az değil.

Fixie kullananlar susamıyor (suluk aksesuarı yok); yağmurda ıslanmıyor (çamurluk gibi aksesuarlar yok); güneş battığı anda sürmeyi bırakıyor (lamba aksesuarı yok); yayaların olduğu yerlerde bağırıyor ya da tehlikeli bir şekilde sürüyor (zil aksesuarı yok); fixie lastiği patlamaz, o yüzden yanında yedek malzeme taşımıyor (sele altı çantası yok, pompa yok, yedek iç lastik yok)... Buna benzer örnekler verebilir miyiz? Pek de doğru bir cümle değil sanki sizinki.

Doğrusu fixie ile vitesli bisiklet arasında parça sayısı ve karmaşıklığı, arıza oranı, kullanım süresi olarak pek de fark yok gibi. Parçaların listesi üzerinden gidersek ortaya çıkar bence. (ISO 8090'dan alıntı olduğun belirtiliyor). Birisi üşenmeyip karşılaştırırsa olabilir tabi :D
Fixie ve single speed bisikletlerde viteslilere göre daha kalın ve ucuz zincir kullanılabilir. Zincir çapraz kullanılmadığı için de daha uzun dayanabilir. Vites telleri uzamaz, vitesi ayar gerektirmez, aktarıcılar eskimez, çünkü yokturlar. Fren ise tek viteslide fark etmiyor belki ama fixie için sadece ön fren yeter. kablolar içeriden gidecek falan dertler olmadan sade bir görünüm elde edersiniz. Geçen aylarda sıfır bir bisiklet aldım 830 tlye, bir fiyat araştırması yapalım bu fiyatlara ne alınabiliyor vitesli.
Arkadaşlarıma bisikletin vitessiz olduğunu söylediğimde gözlerinde sönen ışığı görebiliyorum. Ne kadar vites o kadar itibar... oysa milyonlarca bisiklet sahibinden kaç kişi vites kullanma ihtiyacı duyuyor. Hatta kaç kişi vites kullanmayı biliyor?
Zil takarım bisikletlerime, uzun mesafelerde sele altı çanta ve yama seti taşırım, ancak bunlar olabildiğince minimum tutulur sadeliği bozmamak için, ne bileyim tur çantaları, bagajlar, kadro çantaları, kadans ölçen yol bilgisayarları, çamurluk vs şeyler benim kastettiğim, bence siz de demek istediğimi anladınız, ama o kısımlarda biraz bana haksızlık etmişsiniz. (çamurluk hakkında not: Çamurluk takma imkanı fixielerde pek yok, eski tip tekerin öne doğru kaydığı kadrolara daha rahat oluyor, ama arkası açık kadrolarda tam çamurluk mümkün değil olmuyor. Ben eski kadro fixie bisikletime taktım bir ara ama sonra ondan bile çıkardım, lastik değiştirmek zulüm oluyor.)

Zaten konu fixienin özelliklerinin şöyle böyle olması değil, balkonlarda kullanılmadan bekleyen bisikletlerle dolu ülkemizde pek çok kişinin ihtiyacını karşılayabileceği halde neden satıcı ve alıcılar tarafından benimsenip yaygınlaşamadığı. Sadece fixie de değil, tek vites de yok meydanda. Oysa çoğu kişinin ihtiyacını karşılar fazla dert çıkarmadan. Decathlon mesela getirmiyor yurtdışında 200 euroya satılan fixieye çevrilebilir hafif single speed bisikletlerini

Bu başlığı girerken amacım diğer bisikletlere laf atmak, polemik çıkarmak falan değildi, öyle algılayan olduysa kusura bakmasın. Ben sadece bu bisikletler hakkında farkındalık yaratmaya çalışıyorum ve kendi düşüncelerimi, tecrübelerimi buraya taşıyıp sizlerden de bir şeyler öğrenmeye çalışıyorum. Yukarıdaki Murat Çömezin anafikrine katılmadığım mesajında dahi bilmediğim yeni bir şeyler öğrendim (NJS terimi). Kendisi sağolsun bilgili ve tecrübeli bir insan ve bunu bizimle paylaşmayı seviyor.
Neden sevilsin. Düzdede %10 eğimdede aynı vitesse yada inerken. Kendinle mücadeleyi çok seviyorsa alırsın 53-39 11 28 ruble bam bam gidersin. 1 ay takıl neden sevilmediğini anlarsın. 22 tane oran varken nede 1 tane ile kasayım
Yol bisikletim var, tiagra setli. binlerce km de yaptım kendisiyle, şimdilerde satmayı düşünüyorum, pek kullanmıyorum artık kendisini;)
 
@mmeerrttt ukalalık olarak algılama ama, klasik çelik fixie'lerden farklı yanları var gözümü tırmaladı açıkçası. harbi bir fixie dibine kadar 80'ler kokmalı görüşümce.

- üst boru yere paralel değil, modern alu kadrolar gibi eğimli.
- gidon boğazı modern tip (maşa şaftını içine alan tipten). halbuki quill taksan... ayrıca yere paralel değil, mtb gibi yukarı doğru.
- jantlar çift kat, haliyle eski çelik jantların ince görüntüsü yok.
- sele borusu yeni tip. ben daha retro olsun diye eski tip mandallı sele borusu kullanıyorum.
- kranklar aluminyum.

tabi zevkler renkler tartışılmaz. sen beğeniyorsan bi sorun yok :)
 
@Anonim dropbar olucak tabi, yoksa sen düz gidon fixiecilerden misin? :komik:
 
  • Hahaha
Tepkiler: Cemal Ç.
Bir kaç sene önce alıp elden geçirdiğim bir Single Speed'im var. Yeni bir kadro ile bisikleti yeniliyorum.. Nasip olur da bitirirsem bu eşsiz zevki yaşamaya devam etmek istiyorum...
 
@Anonim o işin şakası yahu... fixie'in düz gidondu sanırım?
 
Fixie sevmemek mi? Mümkün mü? Fixed gear sevmeyen ölsün. Sevmemek söz konusu değil sadece uzaktan sevmek söz konusu, sevgi ile değil kabiliyet ile ilişkilendirilmesi gereken bir tercih durumu söz konusu, yoksa fixed bisikletlerin estetiğini, duruşunu, tavrını reddedebilecek bisikletçi tanımıyorum ben..
 
  • Beğen
Tepkiler: CNC
Fixie deyince hep şu eleman aklıma geliyor, ara ara izliyorum, eminim pek çoğunuz da izlemiştir, ufaktan transa geçiren bir havası var müzikle beraber.
 
Fixie bike eğimi olmayan yollar için tasarlanmış, pratik, masrafsız bir bisiklet türüdür. Hal böyle olunca günlük kullanım alanı ülkemiz için pek yoktur. Ama biliyorum ki bir çok ülkede bu tür bisikletlerin sokak yarışları yapılmakta sadece bu bisiklet ile yarışan kişiler vardır. Tabi ki sponsorlarda markalarını duyurmak için bu yarışları desteklemektedir. Kimbilir gelecekte ülkemizde de bu yarışlar olursa bu tür bisiklet kullananlar artacaktır..Juliet Elliott bunlardan biri..youtube kanalından takip edilebilir..
 
  • Beğen
Tepkiler: Cemal Ç.
Geri