caner ünsal
Forum Bağımlısı
- Kayıt
- 1 Ekim 2007
- Mesaj
- 1.089
- Tepki
- 472
- Şehir
- izmir
- Bisiklet
- Scott
Bisiklet forumda çok kısa bir iki konuda bahsedilmiş ama ben net bir sonuca varamadım. internet üzerin de aşağıdakilere benzer yazılara rastlamak mümkün. Kendi bisikletimin kullanım kılavuzunda özel bir tavsiye ya da yasaklama yok. Seleborusu montajında pek tavsiye edilmiyor ama sanki orta göbek, head set montajında kullanılması normal gibi yazanlarda var. Anlamakta zorlanıyorum. Bu konuda kesin bir sonuca ulaşabilen var mı? sormak istedim.
örnek alıntılar:
With some interfaces of metal parts, grease is used on the clamping surfaces to prevent corrosion. Since carbon does not corrode, grease is not necessary, nor recommended. If grease is applied to a carbon part, the part may slip in the clamp, even at the recommended torque specification.
Before assembling a carbon part, clean both the part and its mating surface with rubbing alcohol and a shop rag; clean until the rag shows no discoloration
---------------------------
The only reason manufacturers tell people not to use grease while installing a seatpost, is because when the post is greased there is a greater chance of the post slipping, and then they go and overtorque the seatpost clamp to stop the slipping and KIA the post.*
Of course you should grease the bottom bracket. Grease won't harm the carbon fibre.
örnek alıntılar:
With some interfaces of metal parts, grease is used on the clamping surfaces to prevent corrosion. Since carbon does not corrode, grease is not necessary, nor recommended. If grease is applied to a carbon part, the part may slip in the clamp, even at the recommended torque specification.
Before assembling a carbon part, clean both the part and its mating surface with rubbing alcohol and a shop rag; clean until the rag shows no discoloration
---------------------------
The only reason manufacturers tell people not to use grease while installing a seatpost, is because when the post is greased there is a greater chance of the post slipping, and then they go and overtorque the seatpost clamp to stop the slipping and KIA the post.*
Of course you should grease the bottom bracket. Grease won't harm the carbon fibre.
