Duyuruyu Kapat
Facebook Gözat
Twitter Gözat

650B çevrimine uygun amortisörlü maşalar

Konu, 'Tekerlekler' kısmında laciverti tarafından paylaşıldı.

  1. laciverti

    laciverti Forum Demirbaşı

    Kayıt:
    7 Ağustos 2008
    Mesajlar:
    519
    Beğeniler:
    517
    Şehir:
    Antalya
    Bisiklet:
    Cannondale
    Seviye:
    Scott spark 35 bisikletim 26 jant, diğer 2 bisikletim 28inç janta sahip ( scott sub 20 ve Cannondale superX. carbon)
    Bu 28 inç jantlı biskletlere alışınca 26 jantlı dağ bisikleti hiç yol yapmıyormuş gibi geliyor. Kırsalda bir canavar, ancak o kırsala ulaşmak için uzun asfalt ve köy yolları var. Bu cumartesi 55km lik olağanüstü güzel, yoldışı parkurlarda zevkle kullandım. Ancak bu parkurun 45 km sinde 28jant ince lastik yetebilirdi. Keşke bir kontrol düğmesi ile lastiği büyütüp küçültebilsek.( Gereksinime göre inceltebilsek ve kalınlaştırabilsek). Bir kontrol düğmesi ile hem de:))))

    İşte bu nedenlerle 650B ( yani 27.5 inç jant) çevrimine sıcak baktım ve araştırmalar yaptım. Ulaşmak çok zor , Lastik çok az, Jant çok az ve uyumlu maşa gerekiyor.

    Sonuçda benim maşam (Rock Schock Reba SL ) uyumsuz. Değişmesi gerekecek. Bu da ekstra masraf.


    Burada benim gibi arayış halinde olanlara 650B çevrimine uygun maşaları yazıyorum:
    İlk sırada üretimde 27.5 jant uyumlu yapılmış maşalar var.
    Takiben 26 jant için olup da 27.5 için de uyumlu olanlar ve sonuçta uyumsuzlar var.

    (Official 650b fork thread compiled)
    650b Specific forks:
    White Brothers, Magic-650b 80mm
    White Brothers, Magic-650b 100mm
    White Brothers, Fluid-650b 100mm
    White Brothers, Fluid-650b 130mm

    The list below has been compiled from the Official 650b fork thread starting from Rensho's first post on page 1, through the 2nd page post number 81. I skipped any information relating to forks that only fit the Quasi-Moto and focused only on forks fitting the Neo-Moto 2.3 tire as the benchmark. I spent a couple of hours reading through the entire thread and double checked my work, but I may have missed or got something wrong. Post up corrections you see that need fixing. It would be great to get some confirmations on the missing data on the (__mm) clearance.

    26" forks compatible with 650b with Neo Moto 2.3 set as the bench-mark for the __mm clearance at the arch and __mm at the crown measurements:
    Maverick SC32 (__mm clearance at the arch and __mm at the crown)
    X-Fusion Velvet (okay'd by X-Fusion for use)
    X-fusion Velvet R (okay'd by X-Fusion for use)
    Manitou Stance (__mm clearance at the arch and __mm at the crown)
    Manitou Nixon Comp 145 (__mm clearance at the arch and __mm at the crown)
    Manitou Nixon Elite coil 145-115 RWDT, 2006 (__mm clearance at the arch and __mm at the crown)
    Manitou Nixon Elite coil 160-130, 2007 (13mm clearance at the arch and 15mm at the crown)
    Manitou Nixon 160, 2008 (__mm clearance at the arch and __mm at the crown)
    RST Capa T26 ML (__mm clearance at the arch and __mm at the crown)
    SR Suntour XCM (__mm clearance at the arch and __mm at the crown)
    Fox Van 36 (__mm clearance at the arch and __mm at the crown)
    RockShox Psylo (12.69mm clearance at the arch and __mm at the crown)
    RockShox Psylo XC (__mm clearance at the arch and __mm at the crown)
    Rockshox Psylo with UTurn (__mm clearance at the arch and __mm at the crown)
    Rockshox 454 U-turn coil Pike, 2008 (5mm clearance at the arch and 10mm at the crown)
    Rockshox Lyrik coil U-Turn 160 - 115mm (6mm clearance at the arch and 12mm at the crown)
    Rock Shox Duke Race 100mm (6.35mm clearance at the arch and __mm at the crown)
    Fox Vanilla 125 RLC (__mm clearance at the arch and __mm at the crown)
    RockShox Revelation 2009 (__mm clearance at the arch and __mm at the crown)

    Fork clears arch, but will slightly rub crown, when fully compressed:
    Fox Vanilla 32/140 fork (__mm clearance at the arch and __mm at the crown)
    Fox 05 Talas (__mm clearance at the arch and __mm at the crown)
    Fox Float RL 2007 (__mm clearance at the arch and __mm at the crown)
    Fox Vanilla RLC (PUSH'd) coil 2008 (__mm clearance at the arch and __mm at the crown)
    RockSohx Judy SL 80mm (__mm clearance at the arch and __mm at the crown)
    Noleen MegaAir 100mm, 2000-2001 (__mm clearance at the arch and __mm at the crown)
    Fox Talas 140 (__mm clearance at the arch and __mm at the crown)
    Manitou Minute 2005 130mm (__mm clearance at the arch and __mm at the crown)

    Fork clears arch, but crown rub is unconfirmed:
    Fox Vanilla 125 RLC fork (__mm clearance at the arch and __mm at the crown)
    Rock Shox Duke (__mm clearance at the arch and __mm at the crown)
    Fox 120 Float RLC, 2009 (__mm clearance at the arch and __mm at the crown)
    Kowa 160ss (8mm clearance at the arch and __mm at the crown)
    Manitou MRD Absolute 130mm (6.35mm clearance at the arch and __mm at the crown)


    Forks that do not clear the arch or crown:
    2008 Vanilla RLC 140 (10mm clearance at the arch and 0mm at the crown)
    RockShox Sid
    RockShox Reba
    RockShox Revelation
    RockShox Recon 351
    RockShox RS Dart2
    RST XMO
    Manitou Skareb 80mm, 2003

    There are a few forks I left out because I felt there wasn't enough information to confirm YES, No or Yes with Crown Rub, etc...
     
    Tolga A. ve Tolga Günsezer bunu beğendi.